Lippert Components Ground Control 3.0 OEM - Manual (Page 5)

Rev: 01.30.2015 Page 5
Ground Control 3.0 OEM Installation Manual
Fig. 4
2. Attach the rear sensor (Fig. 4B) to the mounting plate (Fig. 4C) using two 3⁄8" hex head self-tapping
screws (Fig. 4A). Orientation is imperative for the correct operation of the leveling system.
A
B
C
Fig. 5
3. Attach the mounting plate (Fig. 5B) and sensor (Fig. 5C) assembly to the crossmember (Fig. 5D) using
two 3⁄8" hex head self-tapping screws (Fig. 5A). Ensure that the plate is centered side to side on the
frame and that the sensor is oriented properly (Fig. 5).
A
B
C
D
x
x