Lippert Components Hydraulic Through Frame Slideout - Manual (Page 5)

Rev: 07.09.2014
Page 5
Hydraulic Through Frame Slideout Owners Manual
Prior to Operation
Prior to operating the Lippert Hydraulic Through Frame Slideout System, follow these guidelines:
1. Coach should be parked on the most level surface available.
2. Leveling or stabilizing system should be actuated to ensure coach will not move during operation of
slideout system.
3. Be sure battery is fully charged.
4. Be sure to keep all persons and pets clear of slideout system during operation.
Always make sure that the slideout room path is clear of people and objects before and during operation
of the slideout room. Always keep away from the slide rails when the room is being operated. The gear
assembly may pinch or catch on loose clothing causing personal injury.
NOTE: Install transit bars (if so equipped) on the slideout room during storage and transportation.
Operation
Extending Slideout Room
5. Level the Unit.
6. Verify the battery is fully charged and hooked up to the electrical system.
7. Remove transit bars (if so equipped).
8. Press and hold the IN/OUT switch in the OUT position until room is fully extended and stops moving.
9. Release switch, which will lock the room into position.
NOTE: Only hold OUT switch until room stops.
Retracting Slideout Room
1. Verify the battery is fully charged and hooked up to the electrical system.
2. Press and hold the IN/OUT switch in the IN position until the room is fully retracted and stops moving.
3. Release the switch. This will lock the room into position.
NOTE: Only hold IN switch until room stops.
4. Install the transit bars (if so equipped).
Fig. 1
A
B