Installation – Lippert Components Bike Rack & Tire Carrier User Manual
Page 5
Advertising
INSTALLATION
INSTALLING TIRE CARRIER
1. Hold Tire Carrier up to rear bumper
of RV.
2. Place one U-bolt around back side
of bumper and insert threads
through holes in Mounting Plate.
3. Tighten nut on threads by hand.
4. Repeat Steps 2 and 3 with second
U-bolt.
5. When all 4 nuts have been installed
by hand, finish tightening nuts with
wrench, ensuring Tire Carrier is
secure and perpendicular to
bumper.
6
Advertising