Longshine COBRA15 - Manual (Page 4)

COBRA15
Version: 1.0 iv
BEFORE YOU PROCEED
 Read the safety notices and the User Manual carefully before using the product.
 Keep the box and packaging in case the product needs to be shipped in the future.
 Follow the product and warning label instructions.
 For safety reasons, only qualified service personnel should open the terminal.
 Any changes or modifications that do not follow the instructions in this manual will void
this product/s warranty.
! SAFETY PRECAUTIONS
In the interest of safety, please observe the following precautions:
Power Requirement:
This product is designed to operate on 110~240V AC 50/60Hz in Europe.
Never connect to any outlet or power supply having a different voltage or frequency.
! POWER SUPPLY SAFETY NOTICE
 Disconnect this terminal from the AC outlet before cleaning. Use only a moistened cloth for
cleaning.
 Check the voltage of the power source when connecting the equipment to the power
outlet. Make sure the voltage of the power outlet conforms within voltage range of the
terminal. Failure to comply may cause the electric shock or damage to the terminal. If you
are not sure of the electricity voltage that you are using, contact your local electricity
company.
 To avoid electric shocks, disconnect the power cord from the electrical outlet before
relocating the system.
 Do not overload electric power outlets to avoid fire or electric shocks.
 Protect the power cord from being walked on or pinched particularly at plug.
 If the equipment is not used for a long time, disconnect the equipment from the mains to
avoid damage.
 Never allow liquid into ventilation openings. This could cause fire or electrical shock.