Longshine GFT150 Ver.2.0 - Manual (Page 54)

54
Dithering Enable is for 18 bits panel and Disable is for 24 bits panel.
Channel 1 is for Single Channel and Channel 2 is for Daul Channel .
Brightness Inverse
Allow the user to inverse brightness up / down .
[ Disabled ] : Set Brightness to normal mode . That Brightness up / down
function will work normal .
[ Enabled ] : Set Brightness to inverse mode . That Brightness up / down
function will work inverse . The function is support some Panel will make
brightness down after press brightness up button .
V-LINK mode selection
Allow the user to set V-Link mode function
[ Auto ] : Set V-LINK mode controlled by operating system ( Default )
[ Mode 0 ] : Set V-LINK mode to Mode 0
[ Mode 1 ] : Set V-LINK mode to Mode 1
OnBoard AC’97 Audio
Allow the user to set AC’97 Audio device function
[ Enabled ] : Set AC’97 Audio device to Enabled ( Default )
[ Disabled ] : Set AC’97 Audio device to Disabled