Longshine LCS-6320 - Manual (Page 9)

Feb/06 MN2000000035 9
3. Double click Multifunction adapters, NetMos 9815 PCI
Multi-I/O Controller should be displayed.
Change Parallel Port Address
Some parallel devices need a specific parallel port in order to work. If
your parallel devices works properly, do not change this settings.
For Windows® 2000/XP/Server 20003 Installation
1. From the Device Manager window double click Ports(COM &
LPT), then double click the NetMos PCI ECP Parallel Port …
2. Click Port Settings tab.
3. At the LPT Port Number box, click the down arrow and select an
LPT port that is not in use.
4. Click OK, then close Device Manager to save the changes.