Longshine LCS-8560C1 - Manual (Page 100)

AT Commands for CX81801/CX06833/CX81300/CX06827 Modems Reference Manual
Conexant 102184B
3-60
Defined Values
<value> A decimal number corresponding to the selected option:
0 Disables reporting of modulation connection
(+MCR: and +MRR: are not transmitted).
(Default.)
1 Enables reporting of modulation connection
(+MCR: and +MRR: are transmitted with tx rate,
rx rate).
2 Enables reporting of modulation connection
(+MCR: and +MRR: are transmitted with rx rate
only).
Reporting Current or Selected Values
Command: +MR?
Response: +MR: <current value>
Example: +MR: 0 For default setting
Reporting Supported Range of Parameter Values
Command: +MR=?
Response: +MR: (<value>range)
Example: +MR: (0-2)
+MCR: Report Syntax
Response: +MCR: <carrier>
<carrier> Alphanumeric code corresponding to the reported carrier.
Defined values are:
B103 For Bell 103
B212 For Bell 212
V21 For V.21
V22 For V.22
V22B For V.22bis
V23C For V.23
V32 For V.32
V32B For V.32bis
V34 For V.34
V90 For V.90
V92 For V.92