Luma Comfort EC110S Manual - Manual (Page 13)

13
Say Goodbye to Ugly Products
dust. For a more thorough cleaning, use a diluted vinegar solution to wash
the pad. If necessary, immerse the pad in the diluted vinegar solution for
30 seconds to remove hard water buildup. Be sure to rinse the pad
thoroughly with clear water to remove vinegar residue.
3. Allow the filter and the cooling pad to air dry completely before replacing
them in the unit.
W
ATER
T
ANK
C
LEANING
The water tank should be emptied regularly to ensure hygienic use. To clean
the tank, rinse it with warm water and a light detergent solution. Rinse with
clean water and allow it to dry completely before placing it back into the
cooler.
W
ATER
P
UMP
M
AINTENANCE
Hard water buildup can affect the performance of the cooler’s water pump. To
prevent malfunctions, clean the pump and internal tubing with a calcium and
lime cleaning product (such as CLR) at least once a season.
1. Empty any water from the tank.
2. Pour the cleaner into the water tank and close it. Be sure to push the tank
in completely to ensure the water pump is lowered into the tank full of
cleaner.
3. With the tank closed, allow the pump to soak for 10 to 20 minutes.
4. Remove the cooling pad from the back of the unit.
5. Run the cooler for 30 seconds. This will circulate the cleaning solution
through the pump and tubing to remove any leftover mineral deposits. Do
not operate longer than 30 seconds, or damage might occur to other parts
of the cooler
6. Rinse the tank and fill it with clean water. Run it for several minutes
without the cooling pad in place to ensure the cleaning solution has been
rinsed away.
7. Replace cooling pad and dust filer and operate unit as normal.
If the evaporative cooler will not be in use for an extended period of time, place
the unit back in its original carton and keep it stored in a clean, dry place.