Luma Comfort HC12W - Manual (Page 7)

7
Say Goodbye to Ugly Products
SET UP INSTRUCTIONS
1. Carefully remove all packaging materials and retain for future storage/use.
Make sure there is no residual foam left in any of the components. No
tools will be required to assemble this humidifier.
2. Choose a suitable location for your humidifier. Make sure it is placed on a
flat, level surface such as on a table, desk or on the floor. Pull the
humidifier’s nozzle up vertically as indicated in figure 1.
3. Remove the water tank from the unit’s base by lifting it up as indicated in
figure 2 and unscrew the water tank cover as indicated in figure 3. Fill the
tank with clean water as indicated in figure 4.
4. Place the water tank cover back onto the tank and screw it tightly into
place as indicated in figure 5.
5. Place the water tank back on the unit’s base, making sure that the
positioning slots are aligned as indicated in figure 6.
6. You should hear the water flowing through the water tank. If you do not
hear the water flowing through the tank, remove the water tank from the
base and reattach it.
7. Depending on your chosen height, place the nozzle(s) back onto the water
tank.
8. Before plugging in and turning on the unit, check to see that the unit’s
surface is dry.