COBY DP-152 - Manual (Page 2)

Step 2: Transfer Your Photos
Install the Photo Viewer software onto your computer from the
installation CD.
Connect the DP-152 to your computer using the supplied USB
cable. The DP-152 screen will read “USB Connected”.
Double-click the Photo Viewer icon located on
your computer’s desktop to start the Photo View-
er. Use the software to transfer and synchronize
photos to the DP-152.
Disconnect the DP-152 from your computer.
For more help with the Photo Viewer software, please
refer to the Instruction Manual.
1)
2)
3)
4)
Press and hold to turn the unit on.
Press or to view the previous or next photo, respectively.
Press to access the Main Menu. The Main Menu allows you
view the clock time and date, as well as adjust the options of the
unit.
Press
twice to turn the unit off.
The DP-152 should be charged a minimum of four hours before initial use. To
charge the unit, connect it to a powered-on computer over USB.
A new or exhausted battery should be charged fully to ensure optimum lifetime
performance.
•
•
•
•
For More Help
Please refer to the accompanying Instruction Manual for further help
with your Coby product.
You may also visit our website at:
www.cobyusa.com
to view updates, Frequently Asked Questions (FAQs), and more.
If these resources do not resolve the problem, please contact Coby
Technical Support.
Address Coby Electronics Technical Support
56-65 Rust Street
Maspeth, NY 11378
Email [email protected]
Web www.cobyusa.com
Phone 800-727-3592: Weekdays 8:00AM–11:00PM EST
Weekends 9:00AM–5:30PM EST
718-416-3197: Weekdays 8:00AM–5:30PM EST
Step 3: View Your Photos
DP-152 | Digital Photo Viewer Quick Start Guide