Malone MPG113MD - Manual

MALONE
R
SS Combo SS Combo
TM
SEAWING KAYAK CARRIER with
STINGER LOAD ASSIST
Extension Frame Mounting Plate V-Block 70mm Bolts
TM
TM
Stinger Load Assist Components TM
Installation & Loading Instructions - Please Read Before Beginning
. Insert the two 1” bolts into the two holes
located on the bottom side of the Extension
Frame. Tighten with a phillips screwdriver.
See image 2.
Step 1: Stinger Pre-Assembly
. Place the V-Block into the channel located directly
behind the Malone logo on the Extension Frame.
See image 1.
1
2
12’ Safety Lines
MD Series Only Jawz Universal Adapters Mounting Bolts
60mm
50mm
SeaWing Kayak Carriers 12’ Load Straps T-Knobs
Rubber Plugs
SeaWing Kayak Carrier Components TM
T-knobs
1” Bolts 1 3/4” Bolts
TM