Malone MPG201 - Manual

2
MALONE
R
UNIVERSAL CROSS BAR SYSTEM UNIVERSAL CROSS BAR SYSTEM
Installation & Loading Instructions - Please Read Before Beginning
1
. Lift the forward section of the tower
to adjust it’s position. Center towers
over the side rails. See image 2.
Step 1: Vehicle Installation
. Remove the Cross Bars and components
from the packaging. Using the Key, unlock
and slide the locking plate down. Insert
the Installation Wrench into the bolt and
turn counter clockwise to widen the
capture distance of the feet. See image 1.
Cross Bars with Locks & End Caps Rubber Spacer Blocks Keys Installation Wrench
Warnings / Limitations: The load you are carrying plus the weight of the
rack must not exceed the maximum weight limitation of the vehicle’s
factory rack. Before installing, confirm your vehicle’s factory specification.
. Place Cross Bars onto the vehicle’s raised
side rails. Adjust for the load to be carried.
Note: Bars must be separated by a minimum
of 24”. See image 3.
3