Malone MPG119M - Manual (Page 3)

Installation & Loading Instructions - MPG119 Maui-2 TM
MALONE
R
8
. Place and center the second SUP onto the
Spacer Pads. See image 9.
. Dress the buckle end of the Load Strap under the
saddle and back up and over the top SUP.
See image 10.
NOTE: This instruction is applicable for both one
or two SUPs.
. Place the two Spacer Pads onto the SUP. Locate
each Pad parallel with the front and rear saddles
and centered on the board. See image 8.
NOTE: If only one SUP is to be transported, skip
Instruction 8 and go directly to Instruction 10.
10
9
11
. Pull the buckle end of the Load Strap so that
one continuous loop is over the top SUP. Cross
the loop for additional holding power.
See image 11.
NOTE: This instruction is applicable for both
one or two SUPs.