Cd 5 cd10, Rear panel connections, Front panel controls – Cambridge Audio TOPAZ CD5 User Manual

Page 5: S/p dif co-axial digital output (cd10 only), Line output, Ac power socket, On/off, Infrared sensor, Display, Open/close

Advertising
background image

Power AC

Caution

Serial Number Label Removed

Manufactured in an

ISO9001 approved facility

Line Output

Line Output

Right

Right

Left

Left

Class 1 Laser Product

Luokan 1 Laserplaite

Klass 1 Laserapparat

Made under licence in China

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) This device may not cause harmful interference; 2) This device must accept any interference,

including interference that may cause undesired operation.

Digital Output

S/P DIF Co-axial

Mains Voltage Selector Switch

115V/230V AC~50/60Hz

Rated Power Consumption: 15W

Designed and engineered in London, England

Topaz CD10 Compact Disc Player

www.cambridge-audio.com

CD 5
CD10

5

ENGLISH

Rear panel connections

S/P DIF co-axial digital output (CD10 only)

For input to a separate DAC, such as Cambridge Audio DacMagic*, or
digital recording machine. To obtain best results, use a high quality
75ohm digital RCA interconnect cable (not one designed for normal audio
use).

* For more information, see the DacMagic page on the Cambridge Audio

website: www.cambridgeaudio.com/products.php

1

1

3

2

Line Output

Use good quality interconnect cables from these sockets to any line level
input on your amplifier. For best results and matched performance, we
recommend connection to a Cambridge Audio amplifier.

AC power socket

Once you have completed all connections to the amplifier, plug the AC
power cable into an appropriate mains socket and turn the unit on. Your
compact disc player is now ready for use.

2

Front Panel controls

On/Off

Switches the unit on and off.

Infrared sensor

Receives IR commands from the supplied remote control. An
unobstructed line of sight between the remote control and the sensor is
required.

Display

Alpha-numeric characters which display playback information. On
inserting a disc, the CD player will take a few seconds to read the Table of
Contents (TOC) information from the disc. The display will then show the
number of tracks on the CD and the total length of the CD.

1

1

4

2

5

3

7

6

2

3

Open/Close

Allows you to open and close the disc tray. After placing a CD in the tray,
press Open/Close to close the tray.

Play/Pause

Plays the disc and pauses play.

Stop

Stops the CD playing.

Skip/Scan

Enables you to skip between and search within tracks. Press briefly to skip
a track. Press and hold to scan through a track.

4

5

6

7

3

Advertising