Operation, Mounting the touchpanel, Tilt adjustment – Crestron electronic TPS-6X-DS User Manual

Page 11: Crestron tps-6x-ds docking station for the tps-6x

Advertising
background image

Crestron TPS-6X-DS

Docking Station for the TPS-6X

Operation

Mounting the Touchpanel

To mount the TPS-6X, the touchpanel must first be positioned onto the docking
station at a slight angle to latch the top portion of the docking station onto the
touchpanel. Magnets on the TPS-6X-DS attach to metal plates installed on the
TPS-6X to secure the touchpanel in place (refer to the illustration below).

Touchpanel Mounting

MAGNETS

LATCH THIS PART OF
THE DOCKING STATION
ONTO THE BACK OF THE
TOUCHPANEL FIRST

Tilt Adjustment

The TPS-6X-DS head can be tilted 45 degrees from vertical. The amount of
resistance on the tilt mechanism can be changed or locked to a desired tilt angle by
adjusting the tilt clutch using a 7/64” hex wrench (refer to the illustration below).

Touchpanel Tilt Clutch Adjustment

TILT CLUTCH

Operations Guide – DOC. 6576B

Docking Station for the TPS-6X: TPS-6X-DS

7

Advertising