Maxim Integrated 78M6612 M-API Library - Manual (Page 38)

78M6612 M-API Library User Guide UG_6612_036
38 Rev. 1.00
4.8.2 Memcpy_xr()
Purpose Use to write to Flash the content data to a specific RAM location. An example use
of this API is as follows:
memcpy_xr (RAMData, ROMData, ROMSIZE);
Synopsis Void memcpy_xr ( Unsigned char xdata *dst,
Unsigned char code *src,
Unsigned integer len );
Parameters
dst Input parameter
Specifies starting RAM address to be written (destination).
src Input parameter
Use contents at this ROM/Flash address location as the source data.
len Input parameter
Length (in bytes) of data to write to RAM.
Return Codes
TRUE if the Write was successful.
FALSE if the Write was not completed.
4.8.3 Memcpy_xx()
Purpose Use to copy data from an xdata location to another xdata location.
Synopsis Void memcpy_xx ( Unsigned char xdata *dst,
Unsigned char xdata *src,
Unsigned integer len );
Parameters
dst Input parameter
Specifies starting RAM address to be written (destination).
src Input parameter
Use contents at this RAM address location as the source data.
len Input parameter
Length (in bytes) of data to write to RAM.
Return Codes
None.