Maxim Integrated 78M6610+LMU Evaluation Kit - Manual (Page 15)

78M6610+LMU Evaluation Kit User Manual
Rev 1 15
5.1.4 Configuration Tab
The Configuration tab is used to set up the sensor interface. Once this is done it can be saved to NVRAM for
future use, or programmed to a user-defined configuration and saved. See the Calibration tab for saving the
settings.
5.1.5 Command Register Tab
The Command Register tab is a read/write control tab for manual operation of the command register (0x00).
Hex and decimal formats are supported.