Figure 33 – Maxim Integrated MAX11300PMB1 Peripheral Module and Munich (USB2PMB1) Adapter Board User Manual
Page 31
Advertising
MAX11300PMB1 Peripheral Module and Munich (USB2PMB1) Adapter Board Quick Start Guide
Figure 33. The Width of a PWM Is Adjusted by a Potentiometer
1.
In the drop-down menu at the top right, select P4_DAC_0V>+10V and click the Get plot
box
button. Another plot window opens for DAC on P4. Click on Read DAC File in the
newly opened P4_DAC window and open the
analog
data point
file ideal_sawtooth_right_1000_3x.adc.
2. Connect a potentiometer cable assembly to Port 4 (black jumper wire), Port 14 (red
jumper wire), and GND (black jumper wire). Connect Port 3 to Port 13 (yellow
jumper wire) as shown in
31
Advertising