Maxim Integrated EE-Sim - Manual (Page 13)

page
13
EE-Sim User Guide
2.1.3 Sharing a Single Design
Use this procedure to share a specific design with a contact. You have two
options: start at step 1 or 2.
1. (Option 1) On the My Designs page, position your mouse over the
design you want to share. In the dynamic status area that appears on the
right side, click Share.
a. In the Manage Permissions window for the selected design choose
Read/Write, Read Only, or No Access for each contact in the list.
(This option enables you to share the design with multiple contacts.)
b. (Optional) Click Apply to save your settings.
c. Click Preview and Send Invitation.
2. (Option 2) Open a design and click the Share button in the upper-right
corner of the page, if available. The Share button may not appear on all
pages.
a. In the
Share Your Design window, select a contact (or click
Add Contact) to enter a new contact in the Share With field.
b. In the Set Permissions Level field, choose Read Only or
Read/Write.
Note: For both options, continue with the following common steps.
3. In the Subject field, enter a subject line for the email message to your
new or existing contact.
4. In the Message section:
a. EE-Sim shows Hello. Enter the name of the person receiving
your design.
b. EE-Sim may enter your name as the person who is sharing a
design. You can edit the name.
c. You can also add notes in the Additional comments field at the
bottom of the invitation.
5. Review the invitation and click Send Invite.