Vermont Casting EF26FG - Manual (Page 12)

12 10009816
LIGHT
RETURN
HEATER
RETURN 1 RED
RED BLACK
FLAME
MOTOR
MOTOR
N.O.
+ -
LIGHT
COM.
WHITE
BLACK/BLUE
BLACK
BLUE
WHITE
BLACK/BLUE
RED
LIMIT SWITCH
BLUE
FAN
MOTOR
LINE
NEUTRAL
NEUTRAL
2 WHITE GREEN
LAMP
RETURN
LAMP
7 BLACK/BLUE
5 WHITE
GROUND
1
6
7
6 3 5
6
5
2
8 9
4
4
5
4
6 WHITE
8 BLACK/BLUE
FP1572
HEF wiring
05
4/05
If repairing or replacing any electrical component or wiring, the original wire routing, color coding
and securing locations must be followed.
Any electrical repairs or rewiring of this unit should be carried out by a licensed electrician in accordance with
national and local codes.
NOTE: EF22/26 use 2 instead of 3
light bulbs for flame and ember bed.
WARNING: Disconnect Power Before Servicing
1. Fan/Heater
2. Circuit Board
3. Motor DC
4. Light Socket w/Wiring Assy
5. Light Bulb
6. Wire Clip
7. Bushing Snap
8. Strain Relief
9. Power Cord 16/3
Any electrical re-wiring of this appliance must be done by a qualified
electrician. This wiring must be done in accordance with local codes and/
or in Canada with the current CSA C22.1 Canadian Electrical Code, and
for US installations, the National Electrical Code ANSI/NFPA NO 70.
• Electrical Wiring Diagram