MF Digital Windows XP - Setting Up A Hyperterminal Connection - Manual

Setting Up A Hyperterminal Connection
1. Go to Start-> Programs-> Accessories-> Communications-> Hyperterminal
2. The first window that will appear is the Location Information Window. Here you enter an area code then
press OK button, fig.1
fig.1 Shows Location Information of the HyperTerminal connection.
3. Next a Phone and Modem Options window will appear, press OK to proceed, fig.2
fig.2 Phone and Modem Options window
4. The following window that will appear is the Connection Description Window. Here you will name your
connection. Name the connection TEST and click OK
fig. 3 fig. 4
3. Next you will be prompted to select your COM port. Select the COM port with your loader is attached to and
click OK