MF Digital OptiEC Pro - Manual (Page 9)

999
Page 9
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Document Revision: 2004/12/07
ScribeEC with OptiEC PRO printer
Installation Guide
Document Revision: 2004/12/28
Adjusting the OptiEC PRO Printer Driver Settings
Printing Preferences
To change the printing preferences for the OptiEC
PRO printer, please do the following:
1. Go to Start-> Settings -> Printers
2. Right-click on the CD/DVD Printer 6 in
the Printers Folder
3. Go to Printing Preferences
4. For the Scribe Program to use the printer
effectively, please match the settings of
your printer driver to the example on the
right-side of this page.
a. Ink Cartridge setting depends on
installed cartridge.
5. To save settings, click Apply and OK to
exit.
***NOTE: Any changes made to the printer
driver settings, require a NEW PRN file to be
made. If you change one of the settings, be sure
to create a NEW PRN file.***
Printer Spooling
It is important to disable printer spooling on the
OptiEC PRO printer. To do so, please follow the
steps below:
1. Go to Start-> Settings -> Printers
2. Right-click on the CD/DVD Printer 6
printer in the Printers Folder
3. Go to Properties
4. Go to the Advanced Tab
5. For the Scribe Program to use the printer
effectively, please match the settings of
your printer driver to the example on the
right-side of this page.
6. To save settings, Click Apply and OK to
exit.
***NOTE: Any changes made to the printer
driver settings, require a NEW PRN file to be
made. If you change one of the settings, be sure
to create a NEW PRN file.***