MF Digital DIRECTOR EC OFFICE PUBLISHER WITH Spectrum2 PRINTER - Manual (Page 12)

Adjusting the Spectrum2 Printer Driver Settings
Printing Preferences
To change the printing preferences for the Spectrum
2 printer, please do the following:
1. Go to Start-> Settings -> Printers
2. Right-click on the Spectrum 2 printer in
the Printers Folder
3. Go to Printing Preferences
4. For the Scribe Program to use the printer
effectively, please match the settings of
your printer driver to the example on the
right-side of this page.
5. To save settings, click Apply and OK to
exit.
***NOTE: Any changes made to the printer
driver settings, require a NEW PRN file to be
made. If you change one of the settings, be sure
to create a NEW PRN file.***
Printer Spooling
It is important to disable printer spooling on the
Spectrum 2 printer. To do so, please follow the
steps below:
1. Go to Start-> Settings -> Printers
2. Right-click on the Spectrum 2 printer in
the Printers Folder
3. Go to Properties
4. Go to the Advanced Tab
5. For the Scribe Program to use the printer
effectively, please match the settings of
your printer driver to the example on the
right-side of this page.
6. To save settings, Click Apply and OK to
exit.
***NOTE: Any changes made to the printer
driver settings, require a NEW PRN file to be
made. If you change one of the settings, be sure
to create a NEW PRN file.***
Page 12