Warranty policy 8. ce marking, Specifications, Packing list – MicW i855kit User Manual

Page 2: Accessories, Sa011

Advertising
background image

2 Guitar recording

5 Clip Installation

TP011 Tape for

1825,i855

3 Interview

4 Vocal recording

7. WARRANTY POLICY

8. CE MARKING

The MicW i825/i855
microphones conform
with the relevant CE mark
derectives approved by the
European commission

Type
Capsule diameter
Principe of operation
Polar Pattern
Sensitivity(±3dB)
Frequency Response
S/N ratio
Impedance
Power Source
Operating Temperature
Cable Length
Weight
Connector

Electret Condenser
4.0mm
Pressure
omnidrectional
-45 dB (5.6mV/Pa)
20 Hz~20kHz
More than 65dB
Less than 4.5k
Plug-in power capability, Plug and play
-17 ~+60
1.6m
5g
3.5mm 4-Pole headset interface

Microphone i825

9. SPECIFICATIONS

Type
Capsule diameter
Principe of operation
Polar Pattern
Sensitivity(±4dB)
Frequency Response
S/N ratio
Impedance
Power Source
Operating Temperature
Cable Length
Weight
Connector

Electret Condenser
4.0mm
Pressure Gradient
Cardioid
-49 dB (3.5mV/Pa)
100Hz~10kHz
More than 58dB
Less than 2.5k
Plug-in power capability, Plug and play
-10 ~+50
1.6m
5g
3.5mm 4-Pole headset interface

Microphone i855

10. PACKING LIST

1 Microphone
4 Windscreens
2 Clips
10 Stick tapes
1 Split Adapter
1 User manual

i825/i855 Kit include

12. ACCESSORIES

CB011:2m Extension cable
CB012:Split cable
CB013:PC/Laptop adapter cable
AC011:Aluminum Case.
WJ011:Windjammer
PI49: Preamp conventer

More information can be found at

www.mic-w.com

There are a number of accessories
available from MicW. The accessories can
be purchased separately:

step 1

step 2

step 3

MicW Audio warrants that its Products
will be free from defects in material and
workmanship for one (1) year from the date
of purchase by the Original Purchaser.

CB011

2 meter extension cable

CB012

3.5mm Y-adapter to 3.5mm

microphone input and

headphone output jacks

CB013

PC / Laptop adapter cable

AC011

Microphone carrying case

and stand mount, a unique

aluminum storage case with

3/8” thread protects your

microphone when not used

and holds it when mounting on

a microphone stand

WJ011

Windjammer for i266

microphone for maximum

reduction of wind noise in

outdoor environments

PI49

2.5 Volt to 48 Volt phantom

power preamp converter

SA011

Split Adapter for 3.5mm microphone input and

headphone output jacks

Caution: It may leave the mark on the surface.

Advertising
This manual is related to the following products: