MicW CN201 - Manual (Page 4)

4、POWER SUPPLY
Phantom power (+48 V) is required to operate your
microphone. We assume no liability for damage caused to your
HN101 through defective phantom power. Before activating
phantom power, mute your playback system and connect the
HN101 to the microphone input of your mixing console. After
activating phantom power, the HN101 requires several seconds
to stabilize itself.
5、 APPLICATIONS
The
Mic W
CN201 is a state-of-the-art stereo kit. Therefore, it is
particularly well-suited for stereo recordings. Regardless of
whether you are miking an entire ensemble or a single sound
source (e.g. drums, piano or background vocals), this
microphone lets you achieve outstanding spatial impressions in
every recording session.
Of course, you can use Mic W
CN201 -pair that feature two
matched CN201 microphones as well. Each pair is guaranteed
to the sensitivity match within 0.5dB and phase match within
5°.
6、MICROPHONE INSTALLATION
Use a clip to fix the CN201.
7、 AUDIO CONNECTION
To connect the CN201 to your equipment, use a balanced XLR
microphone cable with the following pin assignment: Pin 1 =
shielding, pin 2 = +, pin 3 = -. Since all contact points of the
CN201 are gold-plated, your microphone cable should feature
gold-plated connectors, if possible.
8、 DIRECTIONAL CHARATERISTIC
The microphone features a capsule with Omni pickup pattern.
Microphones with this polar pattern are most sensitive to sound
coming from in each angle of the microphone.
Polar pattern