Millennia HV-3C Stereo Microphone Preamplifier - Manual (Page 9)


HV-3C
HV-3C GENERAL SPECIFICATIONS
THD + Noise, 20 Hz - 30 kHz, 35 dB gain < .0007%, typ .002 % maximum, +27 dBu out
Frequency Response -3 dB points
Sub 2 Hz to beyond 500 kHz
Frequency Response, Interchannel Deviation < 0.1 dB
Maximum Input Level
+23 dBu
Maximum Output Level +32 dBu
Input Impedance 6,200 ohms, nominal
Output Impedance 24.3 ohms
Noise (Common source) -73 dB @ 60 dB gain (-133 dB EIN)
(30 ohm source) -71 dB @ 60 dB gain (-131 dB EIN)
(150 ohm source) -68 dB @ 60 dB gain (-128 dB EIN)
Common Mode Rejection Ratio > 70 dB @ 35 dB gain, 100 mV, to 20 kHz
> 85 dB typical
Three-pin XLR Polarity Pin 2 = positive polarity, Pin 1 = ground
Four-pin XLR Polarity Pin 1 = ground, Pin 2 = no connection
Pin 3 = +130 VDC (limited to 10 mA)
Pin 4 = unbalanced audio
ELECTRO-MECHANICAL SPECIFICATIONS
Power Consumption 25 Watts, nominal
Power Requirements 100VAC to 240VAC, 50/60Hz, selectable
Fuses (2 required) 2 ea (5 x 20mm, slow-blow, 250V)
see "Rear Panel" section of manual for values
Internal DC Power +130V, +48V, +25V, -25V
Dimensions 19" W x 13" D x 1.75" H
Net Weight aproximately 12 pounds
Millennia Media reserves the right to change specifications, delivery, and pricing without notice.