Millennia NSEQ-2 Twin Topology Stereo Parametric Equalizer - Manual (Page 10)

0
NSEQ-2
(9) TT SELECTION SWITCH "TWIN TOPOLOGY"
Pushbutton switch which selects the corresponding channel as a complete vacuum tube EQ or
a complete solid state EQ. Not a gimmick, Twin Topology is designed around two world class,
musically optimized, all Class-A amplifiers — one amplifier is based on twin triode vacuum
tubes, while the other is based upon all discrete J-FET servo amplifiers. Like having two dis-
tinctly different equalizers in one chassis. When switch is depressed and LED is illuminated, the
channel is operating as a discrete solid state EQ. When the switch is not depressed, the channel
is operating as a high voltage vacuum tube EQ. Because of the NSEQ-2's unique shunt design,
individual EQ bands will have no detectable sonic signature when they are in circuit as long as
the boost/cut controls are set to zero.
(10) GAIN RANGE "10 dB"
Pushbutton switch which determines the range of channel boost/cut. When switch is depressed
and LED is illuminated, the corresponding channel offers +/-10 dB of boost and cut. When
switch is not depressed, the channel offers +/- 20 dB of boost and cut. Use the +/- 20 dB setting
for rough adjustments or deep repairs. Use the +/- 10 dB setting for most artistic EQ require-
ments.
(11) PILOT INDICATOR LIGHT
LED which, when illuminated, shows that the NSEQ-2 unit is powered up and active.
(12) POWER SWITCH "POWER"
Rocker switch for switching AC line power on and off.
(13) TEMPLATE
(not shown) A logging template for use with the NSEQ-2 is available for download on the Mil-
lennia Media web site. http://www.mil-media.com/nseq2.html