Millennia TD-1 Twin Topology Half Rack Recording Channel - Manual (Page 17)

TD-
Millennia
Music & Media Systems
Twin Direct

Millennia
Music & Media Systems
3
TD-1 Transformer Balanced Output Frequency Response
-5
+5
-4
-3
-2
-1
+0
+1
+2
+3
+4
10 20 200K 100 1K 10K 100K
Hz
dB
PERFORMANCE GRAPHS
TD-1 Instrument Path (Tube Topology) Frequency Response
-3
+3
-2
-1
+0
+1
+2
d
B
u
10 100 1K 10K 100K
Hz
TD-1 HV-3 Active Balanced Output Frequency Response
-3
+3
-2
-1
+0
+1
+2
10 200k
Hz
dB
ASSEMBLY OF FOUR RUBBER FEET


Locate four large rubber feet and four #10-32 x 5/8" pan head phillips
mounting screws, included with TD-1 shipping box.
Using a #2 phillips screwdriver, attach each rubber foot with a single
#10-32 x 5/8" pan head screw and tighten snug.
Rubber feet attach at each corner on the TD-1 bottom, per diagram
below.
Note that the four provided mounting screws be used to mount
rubber feet. Using screws of a longer length could cause serious
damage to TD-1's internal electronics components.

 must
ASSEMBLY OF CARRYING HANDLE


Locate steel carrying handle and two #8-32 x 3/8" flat head phillips
mounting screws, included in TD-1 shipping box.
TD-1 is designed so that the carrying handle will mount on the top
cover or side panel.
Using a #2 phillips screwdriver, attach handle to chassis with the
provided #8-32 x 3/8" pan head screws.
Note that the provided mounting screws be used to mount the
handle. Using screws of a longer length could cause serious
damage to TD-1's internal electronics components.

 must
TD-1 GIG BAG (OPTION)
 A rugged Cordura nylon custom-made "Gig Bag" is available for the
TD-1. Pack your TD-1 into its glove-fitted Gig Bag for protection
when traveling, or keeping TD-1 clean and safe when not in use.
Includes shoulder strap, and pockets for storing cables.
FOOT
TD-1 CHASSIS BOTTOM
FOOT
FOOT
FOOT