Clarion DXZ855MP - Manual (Page 30)

30
DXZ855MP
280-8189-00
English
Setting the clock (CLOCK)
When the power is OFF, the clock is displayed.
The clock is displayed in 12-hour format.
1. Press the [ADJ] button.
2. Touch [APPEARANCE].
3. Touch on the left slide button to select
“CLOCK EDIT” and touch [ENT].
CLOCK EDIT
ADJ APPEARANCE
RTN
[ENT]
The time (e.g. “2pm:45”) currently set on this
unit is displayed, and the mode changes to
the time setting mode.
4. Touch on the left slide button to set
hours.
2pm : 45
ADJ APPEARANCE CLOCK
RTN SET
∗ If you operate another button while you
are setting the time, the time is not
adjusted.
5. Touch on the right slide button to set
minutes.
6. Touch [SET].
∗ You will hear a long beep, and the time is
set.
Notes:
• The clock cannot be adjusted when the power is
OFF.
• When the battery has been removed for
maintenance or for repair, set the time again.
7. Press the [ADJ] button to return to the
original mode.
Displaying messages (MSG
INFO)
This function allows you to display a message
on the display when no operation is performed
for more than 30 seconds.
• The factory default setting is “OFF”.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [APPEARANCE].
3. Touch on the left of the display to
select "MSG INFO".
ADJ APPEARANCE
RTN
MSG I N F O O F F
4. Touch on the right of the display to
select “ON” or “OFF”.
5. Press the [ADJ] button to return to the
original mode.
Entering messages to display
in message information (MSG
INPUT)
• Up to 30 characters can be entered.
• The factory default setting is “Welcome to
Optimedia”.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [APPEARANCE].
3. Touch on the left of the display to
select "MSG INPUT".
ADJ-APPEARANCE
RTN
MSG INPUT [ENT]
4. Touch [ENT].
The mode changes to the message entry
mode.
5. Touch [ ]/[ ] to determine the entry
position.
MESSAGE INPUT
MEMO
FONT
A A-Z
RTN
TEXT
We I come to
6. Touch on [FONT] to select the type of
text.
Each touch of
switches the type of
text. For details, see page 27.
7. Touch on [TEXT] to determine the
character to enter.
8. Repeat steps 5 to 7 to enter the message.
9. Touch [MEMO].
You will hear a long beep, and the message
is stored in memory.
10. Press the [ADJ] button to return to the
original mode.
Common Operations
+DXZ855MP_01-24-Eng.p65 05.1.18, 0:09 PM 30