Cuisinart DFP-14N - Manual (Page 2)

2
CAPACITY
Recommended work bowl capacity for various foods
FOODS CAPACITY
Chopped and Puréed Fruit 3 cups
and Vegetables
Chopped or Puréed Meat, Poultry, 2-1/4 pounds
Fish or Seafood
Bread Dough 3 pounds (6 cups flour, yielding
two 1-1/2 pound loaves)
Nuts for Nut Butters 3 cups
Sliced or Shredded Fruit, 14 cups
Cheese, or Vegetables
Cake Batter 4 pounds (5 8-inch layers)
Cookie Dough 3-1/2 pounds (90 cookies)
IMPORTANT
UNPACKING
INSTRUCTIONS
This package contains a Cuisinart ®
Food Processor, and these standard
parts for it: metal chopping blade,
dough kneading blade, slicing disc
and shredding disc, detachable stem
for discs and spatula.
CAUTION:
THE CUTTING TOOLS HAVE VERY
SHARP EDGES. To avoid injury when
unpacking the parts, please follow
these instructions:
1. Place the box on a low table or on
the floor next to the kitchen counter
or table where you plan to keep
the food processor. Be sure the
box is right side up.
2. Remove the cardboard panel and
the instructional material.
NOTE: Remember to return your
warranty card complete with all
information carefully filled out.
3. You will see a rectangular block
of plastic foam that holds the
processor parts and DVD, each
fitted into a cavity in the foam.
The dough kneading blade (A) and
detachable stem (B) for the discs
are in cavities at one short side of
the foam block. Remove them first.
The plastic spatula (C) is on one
long side of the foam block.
Remove it next.
The slicing disc (D) is on one long
side and the shredding disc
(E) on the other. Slide them out of
their grooves WITH GREAT CARE;
THE BLADES ARE SHARP.
Now only the work bowl cover (F)
and the pusher assembly (G)
remain in the foam block. Grasp an
edge of the work bowl cover and lift
it straight up. Grasp the pusher
assembly edge near the center of
the box and lift it straight up.
4. Lift out the plastic foam block.
5. The machine base and work bowl
with metal blade are at the bottom
of the box. CAREFULLY REMOVE
THE METAL BLADE BY GRASP-
ING THE CENTER WHITE HUB
AND LIFTING IT STRAIGHT UP.
NEVER TOUCH THE BLADES,
WHICH ARE RAZOR SHARP.
Carefully remove each part from the
4 corners of the box.
6. Remove the base and bowl togeth-
er by grasping the plastic bowl at
the top with both hands and lifting
the bowl straight up. Do not rotate
the bowl clockwise on the base.
This will cause the bowl to sepa-
rate from the base.
7. Place the processor on a counter
or table and read the instructions
thoroughly before using the
machine.
8. Save the shipping cartons and
plastic foam blocks. You may
want to use them in shipping the
processor at a later date.
A
D
F
G
B
E
C