Installing the wip310 – Cisco WIP310 User Manual
Page 14
Chapter 2
Installing the WIP310
10
Wireless-G IP Phone
Setup Instructions
Press the Wi-Fi Protected Setup button on your
router
Wi-Fi Protected Setup button
Within two minutes, press the Select button (green
check mark icon) on your phone
The phone displays a message if the connection is
successful
NOTE:
If the connection is successful, the
phone creates a Wi-Fi Profile automatically To
view, edit, or manage your Wi-Fi Profiles, see
Manually Configuring Your Wireless Connection.
Using the PIN Connect Method
You can also connect your phone to the wireless network
by entering the phone’s PIN on your wireless router
Press the
1
Power/End Call button to power on the
phone
Power/End Call button
When the Home screen appears, press the
2
Select
button to display the Settings menu Press the Select
Button again and navigate to the Wireless Setup
menu
Settings Menu
Press the
3
Select button to view your options
Navigate to
4
Connect by using PIN.
Connect Screen
Press the
5
Select button Your phone’s PIN is displayed
WPS PIN
Connect to your router’s web interface using a web
6
browser Your computer must be connected to your
wireless network Enter the IP address of the wireless
router in the browser toolbar
If required, enter the user name and password (By
7
default, Linksys routers typically use “admin” for the
user name and “admin” for the password )