Corega Bluetooth Headset BTHS02 - Manual (Page 13)

29 29
BTHS02 User Manual
29
6.2 Power On/Off the headset
《 Power On》
Press and hold [] button for 4 seconds. While you see the LED flashes
blue light for 4 times and hear two short high tones, release [] but-
ton, then it will be powered on.
《 Power Off》
Press and hold [] button for 4 seconds. While you see the LED flashes
red light for 4 times and hear two low tones, release [] button, then
it will be powered off.
6.3 Pairing
You are required to pair the headset with your mobile phone or other
devices before using it.
1. The headset must be powered off before initiating pairing. To initiate
pairing, press and hold [] button for 7 seconds until the blue and
red indicators of headset are flashing alternatively. If you are wear-
ing the headset during the pairing process, you will hear two short
high tones when the headset is ready for pairing.
2. Initiate pairing process of your mobile phone. Refer to the manual of
mobile phone for detail process. You will see a new item “CG-BTHS02”
added in your Bluetooth device list after searching process.
3. You will be asked to enter pin-code to complete pairing. Please enter
[1234] and confirm it.
* Note:
1. [1234] is the default pin-code.
2. The red indicator of headset will turn off and the blue indicator will flash
slowly after pairing completed successfully.
3. If the headset is not in pairing mode, your mobile phone won’t find the
headset. Please set the headset on pairing mode before the mobile phone
search for the headset.
4. If no pairing is possible for a period of time (approx. two minutes), the
headset will automatically power off, and so the previous pairing (if any) is
revoked. You may need to repeat steps 1 to 3 until pairing succeeds.