Expression pedal – MOOER BEM Box LE User Manual
Page 12
11
Expression Pedal
Expression Pedal Connection
Control Assign
Set the Module Selector to [PEDAL], the LED display will show the
controlling object of the expression pedal.
There are 8 kinds of parameter can be controlled by the pedal,
LED will show the type of parameter in control:
01
02
Control Target
LED Display
Control Parameter
Wah
Volume
Volume
Central Frequency
Drive Gain
Gain
Modulation Rate
Modulation Depth
Depth
Rate/Pitch/Frequency
Delay Time
Delay Feedback
Feedback
Time
Reverb Level
Reverb Level
Rotate [VALUE] knob to choose one kind of controlling target, then
the expression pedal will work with the corresponding parameter.
Note: There will be a symbol behind the effect parameter which can be
controlled by the pedal (refer to Effect Explanation for detail).
Note: If the effect module of the chosen target was not turned on, the pedal will be of
no effect.
Note: Pedal setting can be stored in patch.
Note: The expression pedal will be effective in EDIT mode.