Patch pre-select recall function – MOOER GEM Box User Manual
Page 17
16
1. Before power on, hold down the [PATCH +] footswitch, and then
power to the GEM Box, will appear on the display and last flashing
for 3 seconds, it indicates setting up to Patch Pre-Select function
successfully.
3. Press both [PATCH -] and [PATCH +] footswitches together, the
selected patch will be activated, the sound changes, and the display will
stop flashing.
4. To return the normal patch selecting method, turn the power off and
then on again. The Patch Pre-Select function will not preserve when
power on again.
2. In play mode, select the patch to use
next. The selected new bank and
patch’s number flash on the display, but
the sound does not change yet.
BANK PATCH
#
EDIT
BANK PATCH
#
EDIT
BANK PATCH
#
EDIT
BANK PATCH
#
EDIT
PLAY / STOP
MODULE BYPASS
BYPASS / TUNER
HOLD FOR MUTE TUNING
PATCH
PLAY / STOP
MODULE BYPASS
BYPASS / TUNER
HOLD FOR MUTE TUNING
PATCH
Patch Pre-Select
Recall Function
Patch Pre-Select function can let you select the patch first but not to
activate it, and then perform an additional step to activate the patch.
To use this function, conform to the following instructions: