Compaq CP-2E - Manual (Page 66)

Advanced Setup Icons
iPAQ Connection Point CP-2E User Guide 5–19
3. Type the IP address that you wish to exclude into the IP Address
field.
4. If you wish, you can type a brief description into the Comment field.
5. Click Apply. The Connection Point CP-2E must be rebooted for
applied changes to take effect.
6. Click OK. You can reboot the Connection Point CP-2E at any time by
clicking the Reboot button at the left.
BOOTPIP Table
The BOOTP IP Table allows you to reserve IP addresses for devices that
use the BOOTP protocol for TCP/IP network configuration. These values
are based on MAC addresses.
You must have the MAC address of each client device for which you wish
reserve an IP address.
Adding a BOOTP IP Address
1. Click BOOTP IP Table. The BOOTP IP Table page is displayed.