Muse Research Receptor VIP manual v1.1 User Manual
Page 13
13
4. Play your guitar and adjust the gAIN control for Input A so that the green and yellow LEDs light
on a regular basis, but the Red LED does not light even when playing loud.
Feel free to browse the other guitar Effect presets; especially in some of the other TAgs since there
are many different sounds available to you. Enjoy the 32-bit floating point processing and 24-bit
audio output that makes your guitar sound amazing!
RECEPTOR VIP as a Vocal Processor/Effects box
1. Start by plugging the XLR-type microphone cable from your microphone into Input B on the front
panel of your RECEPTOR VIP. If your microphone requires +48V Phantom power, press the button
labeled "48V" next to the Input B label.
2. Power up RECEPTOR VIP if its not already on. If it isn't already lit, press the PLAY button.
3. Turn the BOTTOM knob and select "TAg: FX: Vocal". Select the preset "Fat Voice" using the top
knob and push the knob to load. Sing in to your microphone and enjoy the high quality processing
of your vocals. Feel free to browse the other Vocal processing presets and enjoy how RECEPTOR
VIP enhances the sound of your own voice.
4. Note that you can change the input assignments in the RECEPTOR VIP by simply pressing
EFFECT and SETUP, which allows you to re-assign the effects to different inputs.