MUTEC FMC-7 User Manual

Page 5

Advertising
background image

\\\\\\\\\\\\\\

I N S TA LLAT I O N MAN UAL

I N S TA LLAT I O N MAN UAL

I N S TA LLAT I O N MAN UAL

> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

88

Manual Interfaces-01 D 23.1.2003 0:24 Uhr Seite 8

Tighten the distance bolts with your hand. It is not necessary to use a
special tool for this procedure. Then plug the FMC-05 / FMC-06 expan-
sion carefully (see the sketch) into the 120pin connector socket on the
main board.

To fix the FMC-05, FMC-06 or FMC-07 expansion, turn the supplied
screws (see the sketch) through the holes in the expansion board into
the threads of the previously mounted spacers and tighten them with a
fitting Phillips screwdriver.

Now mount the cover plate to close the aperture in the device.

The FMC-05, FMC-06 or FMC-07 expansion and the cover plate must be
mounted properly before the Yamaha device is connected with the mains
and switched on!

new, maximum Memory Capacities with the FMC-07

With use of the FMC-07 FlashROM memory expansion card in your Yamaha
music workstation, the maximum memory capacity can be now changed to
the following values:

Yamaha Tyros 4 + 5: 2048MB
Yamaha Tyros MOTIF XF6, XF7, XF8: 4096MB
Yamaha Tyros MOXF6, MOXF8: 2048MB

law and Guarantee instruction

We assume no liability for any faulty statements in this installation guide
and thus resulting consequences. Please note that all quoted soft and
hardware product descriptions are registered brand names of their actual
producers.

Any complete or partial duplication of this installation guide is prohibited.
We reserve the right to alter and technically improve the product without
further notification

The general business and guarantee terms of MUTEC GmbH are applicable.
Feel free to inquire them from us.

MUTEC Gesellschaft für Systementwicklung und Komponenten mbH
Siekeweg 6 / 8
12309 Berlin

Fon 030-746880-0
Fax 030-746880-99
Email [email protected]
Web www.mutec-net.com

limitations of

Waveforms and samples

please note, that the numbers of

useable waveforms/samples, respectively of
wave counts/waveform counts will be not
increased when installing the FMC-07 in your
appropriate yamaha music workstation!

For MOtiF xF6-8 and MOxF6+8 the following
Os-based limitations are existing:

max. 2048 Waveforms
max. 128 samples per Waveform
max. 8192 samples (in total)

as for tyros 4 with Os 1.10 or higher:

max. 9999 Wave Counts
max. 2560 Waveforms Counts

as for tyros 5:

no limitations at all.

!

Advertising
This manual is related to the following products: