MUTEC MC-6 - Manual (Page 21)

\\\\\\\\\\\\\\\\\\
A N H A N G A N H A N G A N H A N G
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 88 21
X-SRC
BI-DIR
UNI-DIR AES3
S/P-DIF op SRC
REFERENCE
88.2
48.0
44.1
32.0
192.0
96.0
176.4
MODE
AES3id
S/P-DIF co
AUDIO
IN
AES11
WCLK AES3
S/P-DIF op
AES3id
S/P-DIF co
X-SRC Mode between AES3id and S/P-DIF optical.
X-SRC
BI-DIR
UNI-DIR AES3
S/P-DIF op SRC
REFERENCE
88.2
48.0
44.1
32.0
192.0
96.0
176.4
MODE
AES3id
S/P-DIF co
AUDIO IN
AES11
WCLK AES3
S/P-DIF op
AES3id
S/P-DIF co
X-SRC Mode between S/P-DIF optical and S/P-DIF coaxial.
This area displays different system conditions of your MC-6. There is no
access for changing settings.
»LOCK« (2x)
Doing unidirectional format and sampling rate conversions, the first
»LOCK« LED above lights when the internal PLL circuit has detected
the incoming digital audio or clock reference signal as valid. During
bidirectional format conversions or the different X-SRC modes, both
»LOCK« LEDs light, when the incoming digital audio signals are valid. In
that case, the first LED from above in the LED row indicates the lock status
of the first selected digital audio format, the second LED the status of the
secondly selected digital audio format.
If the digital audio or reference clock signal is unstable, the »LOCK« LEDs
do not light, the whole audio conversion process will be stopped and the
digital audio outputs do not transmit any signals.
If the internal oscillator is selected as reference clock, the first »LOCK« LED
from above will light correspondingly.
»AUDIO« (2x)
These two LEDs indictae if the ncoming digital audio signal is valid aligned
to the processable digital audio standards (see APPENDIX). Using one of the
unidirectional conversion modes, the first »AUDIO« LED, seen from above
of the LED row, indicates the audio status of the digital audio reference
signal. Using bidirectional modes or one of the X-SRC modes, assigned to
the corresponding digital audio formats, selected within the »AUDIO
IN «
mode.
REF CLOCK
IN
»1« + »2«
This area displays the incoming sampling and reference clock rates for the
different operation modes of your MC-6.
Undirectional Format Conversion:
The sampling rate of the digital audio signal, which is selected as reference,
will be displayed under LED row »1«. The LEDs of row »2« do not light.
Undirectional Format and Sampling Rate Conversion:
The clock rate of the selected reference clock signal will be displayed under
LED row »1«. The LEDs of row »2« do not light.
Bidirectional Format Conversion:
The sampling rate of the digital audio format, selected as first in the
»AUDIO
IN « menu, will be displayed with LED row »1«. The sampling rate of
the secondly selected digital audio format is displayed with LED row »2«.
Bidirectional Format and Sampling Rate Conversion:
The clock rate of the selected reference clock signal will be displayed under
LED row »1«. The LEDs of row »2« do not light.
STATUS