Mytek Digital Studio Clock 192CX (ver. 1.0 / Jun 2011) - Manual (Page 5)

Mytek Studio Clock 192CX – User Manual
Quick Start
1. Connect Clock Signal Lines
Connect the FS WCK out to the wordclock input of your device. Set
the receiving device to slave to the external wordclock signal.
2. Operation
Once the unit is powered on it will generate wordclock based
on the settings on the front panel.
3. Configuration
The FS selector cycles through the standard audio sampling
rates. You can choose 44.1 kHz, 48 kHz, 88.2kHz, 96 kHz, 176.4
kHz, and 192 kHz. The unit can also be used to redistribute an
external clock source.
Front Panel
A – Sampling Frequency Selector
B – Sampling Frequency Indicator
C – Clock Source Selector
D – Clock Source Indicator
E – Wordclock In Multiplier Selector
F – Wordclock In Multiplier Indicator
G – Power Switch
www.mytekdigital.com Page: 5/9
STUDIO CLOCK 192CX
MYTEK DIGITAL.USA
SOURCE FS WCK IN
INT OSC
WCK INx4
WCK INx2
WCK IN
FS=
I
O
C
D
E G
F
A A B
A
88.2
48
96
176.4
192
44.1
ULTRA
PRE CISION
INTE RNAL
OS CILLATOR
CX7 97