Neuspeed 25.10.27.9 - Manual (Page 2)

NEUSPEED • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX
Visit us on the web…http://www.neuspeed.com & http://www.apsoutlet.com
7. Using grease supplied, lube inside of urethane
bushings, and slip bushings over NEUSPEED anti-roll
bar just inside of thrust washer. The larger diameter
end of the urethane bushing should be against thrust
washer. 8. Install NEUSPEED anti-roll bar in reverse of
disassembly. NOTE: Line-up groove on side of
urethane bushing with clamp when tightening.
9. Double-check complete installation and TEST DRIVE CAREFULLY.
Copyright 2009, NEUSPEED
® . All rights reserved. Reproduction in whole or in part prohibited.
DOC.25.10.27.9 Rev. 12.11.09