NM Engineering 958856 User Manual
NM Engineering For the car
NM Engineering ∞ 3300 Corte Malpaso, Camarillo, CA 93012 ∞ 805.388.7171 ∞ 805.388.0030 FAX
engineer@nm-
eng.com ∞ www.nm-eng.com
PARTS INCLUDED:
TOOLS REQUIRED:
[1] Left Side Carbon Scuttle
[1] Cleaning Solvent or Degreaser [1] Soft Towel
[2] Right Side Carbon Scuttle
1.
Push Scuttle forward toward front of vehicle then pull
out.
2.
Rotate bulb housing counter clockwise 90°, and then
pull out.
©2011 NM Engineering, a division of Automotive Performance Systems, Inc.
All rights reserved. Reproduction in whole or in part is prohibited.
DOC. NM.668856 Rev. 11.09.11
3.
Clean fender with cleaner where Scuttle will be
positioned.
4. Pull out bulb from Socket.
5. Turn on hazard blinkers then connect plugs to
check if functioning. If not blinking reverse plug
180°.
6. Peel off tape backing and lightly apply to vehicle
for correct positioning. Once aligned press firmly
to all four corners.
CARBON FIBER SCUTTLE
– NM.958856
[R55] MINI Cooper Clubman All 2008-12
[R56] MINI Cooper Hardtop All 2007-12
[R57] MINI Cooper Convertible All 2009-12