NORAC 54VT-GS2-SP01 - Manual (Page 6)

4
3 Installation
3.1 CANbus Interface Installation
1. Securely mount the control module (E01) inside the sprayer cab.
2. Tee the CANbus interface cable (C40) in to the John Deere CANbus. Connect the 6 pin
Deutsch plug on cable C40 to the 2-way coupler (E12). Connect cable C41 between the 2-
way coupler (E12) and the end of the control module with only one Deutsch connector.
C41 and E12 may not be required.
Figure 1: CANbus Interface Installation