Clarion OHMD74 - Manual (Page 30)

30
Operating Headphones
1. Power Switch
Press to activate the headphones. The power on the headphones will turn off
automatically if an audio signal is not detected for over a minute.
2. Volume Adjustment Switch
Adjusts the volume of the sound
in the headphones.
Note:
• Headphones are not to be worn by the operator of the vehicle when driving.
• Do not leave the headphones in a place subject to direct sunlight or extreme
temperatures.
• If the headphones are exposed to direct sunlight for an extended period of time, the
sensitivity of the IR receiver maybe affected causing poor sound quality. Allow
headphones to cool off before using.
Battery Installation
1. Slide the battery cover door downwards.
2. Insert new “AAA” batteries into battery holder
following diagram inside the battery holder.
3. Slide the battery cover door back onto the
headphones.
Note: When the batteries become weak in the
headphones, the audio can sound
distorted or cut in and out.
OHMD74 Final Manual.qxd 6/17/2004 5:33 PM Page 30