Viewing images on a tv set, P. 62 – Canon A450 User Manual
Page 64
62
You can play back images on a television with the supplied AV
cable.
Viewing Images on a TV set
1
Turn off the camera and the TV.
2
Connect the AV cable to the camera’s A/V
OUT terminal.
z
Open the terminal cover by
slipping a fingernail under the
edge and plug the AV cable in all
the way.
3
Plug the other ends of the
AV cable to the VIDEO IN
and AUDIO IN jacks on the
TV.
4
Turn on the TV and switch it to video mode.
5
Turn on the camera.
z
You can also use the TV as the display in the shooting
mode.
z
The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards
. The
default setting varies between regions.
If the video system is set incorrectly, the camera output may
not display properly.
VIDEO
AUDIO
Yellow
Black
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and others