Warning, Grounding – Oakworks ProLuxe Series User Manual

Page 10

Advertising
background image

7

INSTALLATION

INSTALLATION

The tables come completely assembled and ready to use. Plug the cord

into a functioning outlet that is rated for the table.

Arrange the power cord and control cords so that they will not create a

tripping hazard and where the controls are located to your liking and

are conveniently accessible.

To disconnect the table from electrical power, remove the plug from the

outlet. Be sure access to plug is not blocked for disconnecting the table

from power.

This product must be grounded. If it should malfunction or break down,

grounding provides a path of least resistance for electrical current to reduce

the risk of electric shock. This product is equipped with a cord having an

equipment-grounding conductor and a grounding plug. The plug must be

plugged into an appropriate outlet that is properly installed and grounded in

accordance with all local codes and ordinances. See U.S. sample below.

This product is manufactured for use on a nominal 120-volt circuit for the

United States and a nominal 220-volt circuit for use in Europe. The plug has

a grounding pin (see figure A) in a pattern that varies by country as shown

in the Product Identification section of this manual. Make sure that the

product is connected to an outlet having the same configuration as the plug.

Correct Implementation

Incorrect Implementation

DANGER-

Improper connection of the equipment-grounding conductor

(see figure B) can result in a risk of electric shock. Check with a quali-

fied electrician or service man if you are in doubt as to whether the product

is properly grounded. Do not modify the plug provided with the product

- if it will not fit the outlet, have a proper outlet installed by a qualified

electrician.

To reduce the risk of electric shock, this furnishing has a polarized plug.

This plug will fit in a polarized outlet only one way. Do not change the

plug in any way.

Be sure to read all

cautions, warnings

and instructions given

in the manual to prevent
injury to both operator
and client.

GROUNDING

WARNING

Figure A

Figure B

Advertising