OFM 315 User Manual
Model 315, Assembly instructions, Ab c
919-362-4765 (fax)
www.ofminc.com
Ganging Brackets are standard on all
Model 315 Chairs
A
Chair Seat
1 Unit
B
Chair Base
1 Unit
C
Screw
4 Units
CAUTION:
1. Do not use this chair as a step ladder.
2. Check for loose screws and tighten them every 6 months.
Model 315
Stack Chair
Parts Listing
161 Tradition Trail, Holly Springs, NC, 27540
800-520-7471 (voice)
919- 303-6389 (voice)
[email protected]
01.09.2013
A
B
C
STOP
Assembly Instructions
Tools Needed: Phillips Head Screwdriver
Please read all instructions before assembly.
Step 1:
Place Chair Seat (A) upside down on the edge
of a hard surface. Place the Chair Base (B)
upside down on the Chair Seat (A) and align
the holes as shown.
Step 2:
Insert Screws (C) to secure Chair Seat (A).
Make sure Screws (C) are fully inserted and
secured.