COBY electronic TF-TV3209 - Manual (Page 13)

13
ENGLISH
There are internal and external types of antennas.
Connecting an Antenna
Use a coaxial cable to connect the rear panel of the TV's [AIR]
or [CABLE] terminals and the wall mount or external antenna.
When an Air signal is required, connect to the [AIR] terminal.
If a Cable signal is required, connect to the [CABLE] terminal.
If both Air, Cable are available, then connect both [AIR] and
[CABLE] terminals.
Connect the TV power cord when connecting everything else.
Avoid bending the copper tip at the center of the coaxial cable.
1
2
3
Connecting an Antenna
Turn on the TV and follow the steps in <Auto Memorizing>.
Currently all broadcast Air (Analog, Digital) and Cable (Analog,
Digital) channels have been memorized.
Change the channel you wish to watch!
■ Selecting channels directly via the numeric keypad.
eexx)) To watch channel 4: Press ‘4’ ➔ Press OK.
■ To change channels using the [CHANNEL] button.
eexx)) Change from Channel 4 to 11: Keep pressing
the [CHANNEL] button until you get to Channel 11.
1
2
Viewing Air Channels
Rear of the TV
Cable Television Network
Air
or
Caution
☛ lIf the signal is too weak to be received by
the TV, purchase an additional wavelength
amplifier for better reception.
☛ Setting up an UHF antenna will receive
a digital broadcast signal.
☛ FFoorr aappaarrttm meennttss aanndd ccoonnddooss,, cchheecckk w wiitthh
rreellaatteedd ppaarrttiieess oorr yyoouurr llaannddlloorrdd ffoorr U UH HFF
rreecceeiivveerr aavvaaiillaabbiilliittyy..
☛ Some areas can receive digital broadcasts
via cable companies, therefore check with
your local cable operator.