OmniSistem Das Light - Manual (Page 11)

- User manual - Manuel d’utilisateur - Manual del usuario -
11
You will see the references of your moving lights appear on the parameter
page 9). After double-clicking on one of your fixtures, a detailed description of
its DMX channels will be displayed.
To check your lights and fixtures use the cursors 5). Go to the Cursor
window options chapter to have a detailed description of how it works. To
obtain optimum results, see Channel setting in Set-up page chapter.
Inserting conventional lighting
This function enables you to insert one or more DMX channels (a power-
block, a smoke-machine). Click on the middle-button 7).
From the dialog-box displayed, you can select the following options:
• Start DMX address of your conventional lights.
• Number of fixtures.
• Channel name to be assigned to them.
• Index number, to choose the starting index number of your fixtures.
By default, the box displays 1.
Type in the information required and confirm. (OK)
Deleting fixtures
This function is used for deleting an intelligent fixture or a basic DMX light
from the parameter-window 9). After selecting your light, right-click 8) and
confirm (OK).
It is operational only if a fixture is selected at its source 9).
You are prompted to confirm.