Channel Vision Digital RF Modulator E-1200 - Manual (Page 6)

RF Modulator PLL Synthesized Oscillator
Video NTSC
Audio L&R Monaural/Stereo loop opt.
RF Carriers
Frequency Stability +1KHz
Frequency Ranges UHF 471.25-855.25MHz
Ultraband 469.25-859.25MHz
Channels UHF 14-78, Ultraband 65-135
(Exc. 95-99)
Channel Width 6.0MHz
Audio Offset 4.5MHz
Sidebands Double
RF Output
Maximum 30dBmV
Gain Range Fixed
Video Output 1VPeak to Peak
Audio Output 1V RMS
Channel Selector Up/Down selector buttons/I
Increments of one
Specifications:
Video Performance
Differential Gain Less than 2% (0.2dB)
Differential Phase Less than 3 degree
Signal/Noise Ratio Greater than 52dB
Spurious Output Rejection
Outside Carrier +12MHz Greater than 70dBC
Inside Carrier +12MHz Greater than 55dBC
Isolation Greater than 70dB
Inputs
Video 0.4V-2.7V Peak to Peak
Audio 1V RMS
Connectors
Video In RCA Female
Audio In RCA Female
RF Output F type female
Operating Temperatures
0
o
C to 50
o
C
Transformer Input
Input Voltage 115 VAC, 50/60Hz
Power 8 Watts
Output Voltage 12.0 VAC C/T @ 400mA
Channel Vision
Limited Warranty
Channel Vision Technology will repair or replace any defect in material or workmanship which occur during
normal use of this product with new or rebuilt parts, free of charge in the USA, for two years from the date of
original purchase. This is a no hassle warranty with no mail in warranty card needed. This warranty does not
cover damages in shipment, failures caused by other products not supplied by Channel Vision Technology, or
failures due to accident, misuse, abuse, or alteration of the equipment. This warranty extends only to the original
purchaser. A purchase receipt, invoice, or other proof of original purchase date will be required before warranty
repairs are provided.
Mail in service can be obtained during the warranty period by calling toll free (800) 840-0288 toll free. A Return
Authorization number must be obtained in advance and be marked on the outside of the shipping carton.
This warranty gives you specific legal rights, and you may have other rights (which vary from state to state). If a
problem with this product develops during or after the warranty period, please contact Channel Vision, your
dealer, or any factory-authorized service center.