Cisco IP Phone 7961G-GE - Manual (Page 36)

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Security Configuration Menu
4-36
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager
OL-11528-01
You can access the 802.1X Authentication Real-Time Stats by pressing the
Settings button and choosing Security Configuration > 802.1X Authentication
Status. To exit this menu, press the Exit key.
Table 4-14 802.1X Authentication Real-Time Status
Option Description To Change
802.1X
Authentication Status Real-time progress of the 802.1X
authentication status, displaying
one of the following states:
• Disabled—802.1X is disabled
and transaction was not
attempted
• Disconnected—Physical link
is down or disconnected
• Connecting—Trying to
discover or acquire the
authenticator
• Acquired—Authenticator
acquired, awaiting
authentication to begin
• Authenticating—Authentication
in progress
• Authenticated—Authentication
successful or implicit
authentication due to timeouts
• Held—Authentication failed,
waiting before next attempt
(approximately 60 seconds)
Display only—Cannot configure.